# Bazel build outputs

Bazel uses a very opinionated scheme to store build artifacts that is a very
common source of confusion for developers. This pages tries to clarify how
things work.

## The Bazel `output_base`

By design, `bazel build` commands will never write files to a project's source
directory (or one of its sub-directories). Instead Bazel uses a *user-specific*
*parallel* directory to store all outputs, called the `user_output_root`, which
is by default:

- `~/.cache/bazel/_bazel_$USER` on Linux.
- `%HOME%\_bazel_%USERNAME%` on Windows.

For each workspace directory where `bazel` is run, a separate directory, named
the `output_base` is created under the `user_output_root`, as:

      ${user_output_root}/<WORKSPACE_HASH>`

Where `<WORKSPACE_HASH>` is a long hexadecimal hash (computed from the
directory's absolute path).

Since this path is completely unpredictable, the command
`bazel info output_base` will print it, when used inside a Bazel project.
For example:

    $ mkdir -p /tmp/project1 && cd /tmp/project1 && touch WORKSPACE.bazel
    $ bazel info output_base
    Starting local Bazel server and connecting to it...
    /usr/local/google/home/digit/.cache/bazel/_bazel_digit/6c7b78994da78136b5cb6b7607361ad3

    $ mkdir -p /tmp/project2 && cd /tmp/project2 && touch WORKSPACE.bazel
    $ bazel info output_base
    Starting local Bazel server and connecting to it...
    /usr/local/google/home/digit/.cache/bazel/_bazel_digit/c37b9d68308ee5abe2f781dd38b733b9

    $ mkdir -p /tmp/not-a-project && cd /tmp/not-a-project
    $ bazel info output_base
    WARNING: Invoking Bazel in batch mode since it is not invoked from within a workspace (below a directory having a WORKSPACE file).
    ERROR: The 'info' command is only supported from within a workspace (below a directory having a WORKSPACE file).
    See documentation at https://bazel.build/concepts/build-ref#workspace

> [!NOTE]
> **Note:** Bazel spawns a new background server process for *each* workspace (and thus `output_base`) where it is used. This server process will shutdown automatically after idling for 5 minutes (use `bazel shutdown` to stop it immediately).

This scheme is flexible but not perfect:

- **Pro**: multiple users on the same machine can share the same read-only
  project directory.

- **Pro**: multiple project directories for the same user will always use
  independent output paths.

- **Con** : Looking at generated files directly from the command-line or even
  graphical explorers is *very* difficult.

- **Con** : Removing a project directory (e.g. with `rm -rf .../my-project`)
  does not remove its outputs (a significant source of waste).

- **Con** : Moving a project directory (e.g. with `mv my-project my-project2`)
  does not reuse previous `output_base` content (and leaves the old ones in
  place, now inaccessible).

- **Con** : The default location for the `user_output_root`, and thus the
  `output_base` is often not on the same filesystem / partition than the
  project. This can have unexpected consequences in terms of performance / disk
  usage.

Call `bazel clean` to remove build outputs from the current `output_base`.
This *must* be done *before* removing a source project directory.

In practice, it is easy to bloat the content of the `user_output_root` with
build artifacts from stale Bazel projects that were never properly cleaned.
Worse, trying to simply remove the `user_output_root` manually may not work,
because Bazel creates read-only build artifacts by default, which prevent a
command like `rm -rf ~/.cache/bazel` from working!

> [!NOTE]
> **Note:** Due to all this, the Fuchsia platform build prefers to enforce custom `user_output_root` and `output_base` locations under the `fx`-controlled build-directory (e.g. `out/default/gen/build/bazel/output_base`). It also enforces an option to generate writable outputs. This makes `fx clean` work correctly in all cases.

## Bazel `output_base` content:

Several things are actually stored under the `output_base`:

- **Workspace directories for external repositories**:

  Those correspond to external project dependencies. Often these are not part of
  the project's source tree, but downloaded from the network or generated
  programmatically.

  Their content is stored under `${output_base}/external/<repository_name>`,
  where the `external` part is hard-coded, and `<repository_name>` matches the
  external repository's canonical name.

  > [!NOTE]
  > **Note:** that this content is not removed by `bazel clean` by default. Use `bazel clean --expunge` to remove them from the `output_base`.

- **Build artifacts**:

  The files generated by running `bazel build`. These are stored under:

      ${output_base}/execroot/<workspace_name>/bazel-out/<config_dir>/bin/

  Where:
  - The `execroot`, `bazel-out` and `bin` parts are hard-coded and cannot be
    changed.

  - For targets defined in the project's own `BUILD.bazel` files,
    `<workspace_name>` defaults to `__main__`, unless it is set in the project's
    `WORKSPACE.bazel` file with a directive like:

        workspace(
          name = "my_project",
        )
        ```

      - For targets defined in external repositories, `<workspace_name>` matches
      the repository's canonical name.

      - The `<config_dir>` value is a name derived from the build configuration used
      to configure the target that generated the build artifact. This allows
      rebuilding the same target in different ways, each time using a different
      `<config_dir>` value.

      Note: The `<config_dir>` value is **generally unpredictable**. More on this [here][bazel-config-dirs]

- **Test results**:

  The log files generated when `bazel test` is called, stored under
  `${output_base}/execroot/<workspace_name>/bazel-out/<config_dir>/testlogs/`.
- **Internal cache and configuration files**:

  Used by remote builds and remote cache features. These files can be ignored by
  developers.

### Bazel `execroot` directory:

The `execroot` is used to run Bazel commands that generate build artifacts,
but how this is done depends on whether sandboxing is enabled for a specific action.

- On Linux, sandboxing is enabled by default for all actions.
  There is no sandboxing support on Windows (as of Bazel 7).

- A Bazel action can disable sandboxing intentionally by using the
  `no-sandbox` tag in definition.

- Sandboxing can be disabled globally with an option like
  `--spawn_strategy=local` when invoking `bazel`.

#### Without sandboxing:

When sandboxing is disabled, all build actions that generate artifacts for
a given workspace will put output files under
`${output_base}/execroot/<workspace_name>`.

All paths to source files and build artifacts that appear in the action's
command will thus be relative to it.

Bazel ensures that symlinks to the input sources used by the command are
created under the execroot before the command is launched.

For example, an action that would compile the `//src/foo/foo.cc` file,
which contains `#include "foo.h"`, corresponding to `//src/foo/foo.h` could
look like:

    gcc -c -o bazel-out/k8-fastbuild/bin/src/foo/foo.o src/foo/foo.cc -Isrc/foo

Which works because:

- Before running the command, Bazel would create the symlink
  `${output_base}/execroot/__main__/src` pointing to `$PROJECT/src`,
  so that `src/foo/foo.cc` and `src/foo/foo.h` resolve to
  `$PROJECT/src/foo/foo.cc` and `$PROJECT/src/foo/foo.h` as expected.

- The location `bazel-out/k8-fastbuild/bin/src/foo/foo.o` is the final
  output path, for the object file created by compiling `foo.cc` in the
  build configuration used by this command.

#### With sandboxing:

When sandboxing is enabled, Bazel creates for each command a temporary
directory (e.g. `${output_base}/sandbox/linux-sandbox/<random-number>`)
and will create a symlink tree to mimic the execroot layout under it, but
only for the inputs it know about. In this case, this would look like:

- Symlink for the inputs `${sandbox}/execroot/__main__/src/foo/foo.cc`
  and `${sandbox}/execroot/__main__/src/foo/foo.h` pointing to
  `$PROJECT/src/foo/foo.cc` and `$PROJECT/src/foo/foo.h` respectively.

- Run the *exact same command* under `${sandbox}/execroot/__main__`.
  instead of `${output_base}/execroot/__main__`.

- Once the command completes, copy the known output from the sandbox path at
  `${sandbox}/execroot/__main__/bazel-out/k8-fastbuild/bin/src/foo/foo.o`
  to its final location at
  `${output_base}/execroot/__main__/bazel-out/k8-fastbuild/bin/src/foo/foo.o`.

- Finally, the sandbox directory, and all its content are removed. This also
  means that undeclared outputs are ignored.

[](https://issues.fuchsia.dev/issues/new?component=1439230&template=1881640&description=Issue+on:+https://fuchsia.dev/docs/development/build/bazel_concepts/build_outputs.md "Report a bug or suggest improvements on this page") [](https://cs.opensource.google/fuchsia/fuchsia/+/main:docs/development/build/bazel_concepts/build_outputs.md "View the source code of this page") [](https://ci.android.com/edit?repo=fuchsia/fuchsia/main&file=docs/development/build/bazel_concepts/build_outputs.md&cloneRepo=fuchsia/fuchsia:refs/heads/main&fullPath=fuchsia/docs/development/build/bazel_concepts/build_outputs.md "Edit the source code of this page")