Inspect discovery and hosting

Inspect is a powerful diagnostics feature for Fuchsia Components.

This document describes the details about how components host their Inspect data and how various tools discover that data.

Hosting Inspect data

A component may expose Inspect data in the following ways:

Components do not need to reach out to other services in order to expose Inspect data.

Components generally do not need to be concerned with which method is being used, client libraries abstract out the specific mechanism for hosting. Nearly all implementations will eventually use Tree.

Feature fuchsia.inspect.Tree VmoFile fuchsia.inspect.deprecated.Inspect Description
Non-lazy values Yes Yes Yes Components may record values such as strings and integers.
Lazy values Yes No Yes Components may generate values dynamically at read time.
Mutable tree Yes Yes Yes Components may modify the values stored in their output.
Post-mortem inspection Yes Yes No The values recorded by a component are available after that component exits.
Low-latency snapshots Yes Yes No A full snapshot of the data can be obtained with low-latency.
Consistent snapshots Yes* Yes No The snapshot of the tree is guaranteed to represent its state at one point in time.

(*: Each tree's snapshot is consistent, but inter-tree consistency is not guaranteed)

fuchsia.inspect.Tree

fuchsia.inspect.Tree supports all features of the Inspect API, and it is the recommended way to expose Inspect data from components.

Components publish fuchsia.inspect.Tree using the fuchsia.inspect.InspectSink protocol.

Implementation

The fuchsia.inspect.Tree FIDL File defines the protocol that is hosted by components to expose their Inspect data.

The Tree protocol links together multiple Inspect VMOs in a "tree of trees."

Figure: Example of trees

In the above figure, the tree named "root" handles protocol fuchsia.inspect.Tree for connections on the top-level service hosted under fuchsia.inspect.Tree. Child trees may be enumerated and opened using methods on the protocol. For example, "child B" may not exist in memory until opened and read.

The protocol supports this behavior in the following ways:

  • GetContent

    This method obtains the content of the tree, currently in the form of an Inspect VMO. By convention, calling this method on the root tree should return a VMO that will be continually updated with new data. The client should not need to re-read the content of the tree to read new values.

  • ListChildNames

    This method accepts an iterator over which the names of children of the tree will be returned. For example, the tree in the figure above will return names "child A" and "child B" when run on the root tree.

  • OpenChild

    This method accepts a request for fuchsia.inspect.Tree that will be bound to the tree specified by a given name. Using this method a client may iterate through all trees exposed over the root iterface.

fuchsia.inspect.deprecated.Inspect

This deprecated interface is used by Go to expose Inspect data. While fuchsia.inspect.Tree exposes a "tree of trees," this interface exposes only a single tree where subtrees may be dynamically instantiated.

This interface is deprecated in favor of the VMO format hosted by Inspect tree for the following reasons:

  • VMO format supports low-latency snapshots without communicating with the hosting program.
  • VMO format snapshots are always consistent for the whole tree.
  • VMO format supports postmortem inspection, all Inspect data using the deprecated interface dies with the component.
  • Tree protocol supports the same dynamic features as the deprecated interface.

Reading Inspect data

The two primary ways to read Inspect data are:

  1. iquery
  2. The Archivist

iquery

iquery (Inspect Query) is the CLI for interacting with Inspect data.

iquery's primary mode of operation takes a list of selectors for Inspect data and prints out the contained information. A selector consists of three parts which are separated by a ::

  1. The component selector: This is the moniker in v2 or the realm path plus the component name in v1.
  2. The node path: The path to a node in the inspect hierarchy.
  3. The property path: The name of the property.

For iquery only (1) is required. If only (1) is provided (for example realm/component) then iquery will use a selector realm/component:* to fetch all the inspect data.

iquery includes two utility commands to know what components are available and what selectors can be used:

  • list: iquery will print all component selectors that are available, this is all v2 monikers and all v1 realm paths with component names.
  • selectors: iquery will print all selectors available under the provided selector locations.

These modes could be used together as follows:

$ iquery show `iquery list | grep component_name`

Alternatively iquery also allows to print the inspect data at a location. A location consists either of the path to a .inspect file, or the path to a directory containing fuchsia.inspect.Tree. iquery includes a utility command to list all files that contain inspect data (list-files).

iquery's secondary mode of operation (triggered by list-files) recursively identifies locations for Inspect data from the given directory path. The two modes may be used together as follows:

$ iquery list-files [component_moniker]
bootstrap/driver_manager
  class/display-coordinator/000.inspect
  ... additional output


$ iquery show --file 'class/display-coordinator/000.inspect'

In the example above, iquery list-files is ran to find a list of Inspect locations. Then, iquery is ran on one of the output to recursively list data in the matching locations. You may instead write:

$ fx iquery show --manifest component_name

Archivist

The Fuchsia Diagnostics Platform, hosted by the Archivist, is responsible for monitoring and aggregating Inspect data on demand.

When running under component manager, diagnostics data is made available to the Archivist through event capabilities.

The Archivist is offered events by the root realm. Therefore, it sees events from the whole system. The events it is allowed to see and is subscribed to are the following:

  • CapabilityRequested: sent to the Archivist instead of a regular Directory connection when a component connects to InspectSink or LogSink. This allows Archivist to know the monikers and URLs of the components connecting to these protocols.

A component that wishes to expose Inspect needs to use the fuchsia.inspect.InspectSink protocol. This typically looks as follows:

{
    use: [
        {
            protocol: "fuchsia.inspect.InspectSink",
            from: "parent",
        },
    ],
}

There's a useful manifest include that simplifies this and is required by Inspect libraries:

{
    include: [
        "inspect/client.shard.cml",
    ]
}

Reading Inspect from the Archivist

The Archivist hosts fuchsia.diagnostics.ArchiveAccessor, which provides the StreamDiagnostics method to obtain Inspect data from running components.