Zircon kernel to userspace bootstrapping (userboot)

Zircon has a microkernel style of design. A complexity for microkernel designs is how to bootstrap the initial userspace processes. Often this is accomplished by having the kernel implement minimal versions of filesystem reading and program loading just for the purpose of bootstrapping, even when those kernel facilities are never used after boot time. Zircon takes a different approach.

Boot loader and kernel startup

A boot loader loads the kernel into memory and transfers control to the kernel's startup code. The details of the boot loader protocols are not described here. The boot loaders used with Zircon load both the kernel image and a data blob in Zircon Boot Image format. The ZBI format is a simple container format that embeds items passed by the boot loader, including hardware-specific information, the kernel "command line" giving boot options, and RAM disk images (which are usually compressed). The kernel extracts some essential information for its own use in the early stages of booting.

BOOTFS

One of the items embedded in the Zircon Boot Image is an initial RAM disk filesystem image. The image is usually compressed using the zstd format. Once decompressed, the image is in BOOTFS format. This is a trivial read-only filesystem format that simply lists file names, and for each file the offset and size within the BOOTFS image (both values must be page-aligned both fields and are limited to 32 bits).

The primary BOOTFS image contains everything that the userspace system needs to run: executables, shared libraries, and data files. These include the implementations of device drivers and more advanced filesystems that make it possible to read more code and data from storage or network devices.

After the system has bootstrapped itself, the files in the primary BOOTFS become the read-only filesystem tree rooted at /boot (and served by component manager).

Kernel loads userboot

The kernel does not include any code for decompressing zstd format, nor any code for interpreting the BOOTFS format. Instead, all of this work is done by the first userspace process, called userboot.

userboot is a normal userspace process. It can only make the standard system calls through the vDSO like any other process would, and is subject to the full vDSO enforcement regime. What's special about userboot is the way it gets loaded.

userboot is built as an ELF dynamic shared object, using the same RODSO layout as the vDSO. Like the vDSO, the userboot ELF image is embedded in the kernel at compile time. Its simple layout means that loading it does not require the kernel to interpret ELF headers at boot time. The kernel only needs to know three things: the size of the read-only segment, the size of the executable segment, and the address of the userboot entry point. At compile time, these values are extracted from the userboot ELF image and used as constants in the kernel code.

Like any other process, userboot must start with the vDSO already mapped into its address space so it can make system calls. The kernel maps both userboot and the vDSO into the first user process, and then starts it running at the userboot entry point.

Kernel sends processargs message

In normal program loading, a bootstrap message is sent to each new process. The process's first thread receives a channel handle in a register. It can then read data and handles sent by its creator.

The kernel uses the exact same protocol to start userboot. The kernel command line is split into words that become the environment strings in the bootstrap message. All the handles that userboot itself will need, and that the rest of the system will need to access kernel facilities, are included in this message. Following the normal format, handle info entries describe the purpose of each handle. These include the PA_VMO_VDSO handle.

userboot finds system calls in the vDSO

The standard convention for informing a new process of its vDSO mapping requires the process to interpret the vDSO's ELF headers and symbol table to locate system call entry points. To avoid this complexity, userboot finds the entry points in the vDSO in a different way.

When the kernel maps userboot into the first user process, it chooses a random location in memory, just as normal program loading does. However, when it maps the vDSO in it doesn't choose another random location as is normal. Instead, it places the vDSO image immediately after the userboot image in memory. This way, the vDSO code is always at fixed offsets from the userboot code.

At compile time, the symbol table entries for all the system call entry points are extracted from the vDSO ELF image. These are then massaged into linker script symbol definitions that use each symbol's fixed offset into the vDSO image to define that symbol at that fixed offset from the linker-provided _end symbol. In this way, the userboot code can make direct calls to each vDSO entry point in the exact location it will appear in memory after the userboot image itself.

userboot decompresses BOOTFS

The first thing userboot does is to read the bootstrap message sent by the kernel. Among the handles it gets from the kernel is one with handle info entry PA_HND(PA_VMO_BOOTDATA, 0). This is a VMO containing the ZBI from the boot loader. userboot reads the ZBI headers from this VMO looking for the first item with type ZBI_TYPE_STORAGE_BOOTFS. That contains the BOOTFS image. The item's ZBI header indicates if it's compressed, which it usually is. userboot maps in this portion of the VMO. userboot contains zstd format support code, which it uses to decompress the item into a fresh VMO.

userboot loads the first "real" user process from BOOTFS

Next, userboot examines the environment strings it received from the kernel, which represent the kernel command line. If there is a string userboot.next=file+optional_arg1+optional_arg2=foo+... then file will be loaded as the first real user process with the '+' separated arguments passed to it. If no such option is present, the default file is bin/component_manager+--boot. The files are found in the BOOTFS image.

To load the file, userboot implements a full-featured ELF program loader. Usually the file being loaded is a dynamically-linked executable with a PT_INTERP program header. In this case, userboot looks for the file named in PT_INTERP and loads that instead.

Then userboot loads the vDSO at a random address. It starts the new process with the standard conventions, passing it a channel handle and the vDSO base address. On that channel, userboot sends the standard processargs messages. It passes on all the important handles it received from the kernel (replacing specific handles such as the process-self and thread-self handles with those for the new process rather than for userboot itself).

userboot loader service

Following the standard program loading protocol, when userboot loads a program via PT_INTERP, it sends an additional processargs message before the main message, intended for the use of the dynamic linker. This message includes a PA_LDSVC_LOADER handle for a channel on which userboot provides a minimal implementation of the standard loader service.

userboot has only a single thread, which remains in a loop handling loader service requests until the channel is closed. When it receives a LOADER_SVC_OP_LOAD_OBJECT request, it looks up the object name prefixed by lib/ as a file in BOOTFS and returns a VMO of its contents. Thus, the first "real" user process can be (and usually is) a dynamically linked executable needing various shared libraries. The dynamic linker, the executable, and the shared libraries are all loaded from the same BOOTFS pages that will later appear as files in /boot.

An executable that will be loaded by userboot (i.e. component manager) should normally close its loader service channel once it's completed startup. That lets userboot know that it's no longer needed.

userboot rides off into the sunset

When the loader service channel is closed (or if the executable had no PT_INTERP and so no loader service was required, then as soon as the process has been started), userboot no longer has anything to do.

If the userboot.shutdown option was given on the kernel command line, then userboot waits for the process it started to exit, and then shuts down the system (as if by the dm shutdown command). This can be useful to run a single test program and then shut down the machine (or emulator). For example, the command line userboot.next=bin/core-tests userboot.shutdown runs the Zircon core tests and then shuts down.

Otherwise, userboot does not wait for the process to exit. userboot exits immediately, leaving the first "real" user process in charge of bringing up and taking down the rest of the system.