设置 build 目录
usage: fx set PRODUCT.BOARD [--with GNLABEL1,GNLABEL2,...]
[--release] [--auto-dir] [--args ARG] [--variant VARIANT]
[--with-base GNLABEL1,GNLABEL2,...]
where PRODUCT is an entry from `//products` or `//vendor/*/products` and
BOARD is an entry from `//boards` or `//vendor/*/boards`. Use the
`fx list-products` and `fx list-boards` commands to see a list of
possible products and boards (respectively). See the README.md in those
directories for a description of the various options.
Use `fx --dir BUILD_DIR set` to specify the build directory. If it begins with
`//` or `out/` then it's taken as relative to FUCHSIA_DIR. Otherwise it should
be an absolute path or a path relative to the current working directory that
winds up in `FUCHSIA_DIR/out`. It defaults to `out/default`.
This command stores the location of the build directory in the //.fx-build-dir
file, which causes subsequent `fx` commands to use that build directory. Use
`fx use` to switch build directories.
This is a wrapper around running `gn gen --check=system BUILD_DIR --args ...`.
If GN fails with an error, `fx set` does not change anything.
optional arguments:
--args Additional argument to pass to gn. If the --args
argument is given multiple times, all the specified
arguments are passed to gn.
N.B. Arguments must be expressed using GN's syntax.
In particular this means that for strings they must
be quoted with double-quotes, and the quoting must
survive, for example, the shell. Thus when passing
an argument that takes a string, pass it with
something like --args=foo='"bar"'. E.g.,
bash$ fx set core.x64 --args=foo='"bar"'
More complicated arguments, e.g., lists, require
their own special syntax. See GN documentation
for the syntax of each kind of argument.
--auto-dir Act like `fx --dir out/PRODUCT.BOARD set ...`.
--ccache|--no-ccache Whether to use ccache during the build. Ccache attempts
to make builds faster by caching build artifacts.
Defaults to detecting whether the CCACHE_DIR environment
variable is set to a directory.
--fuzz-with Pass a sanitizer name, e.g. "--fuzz-with asan" to
enable ALL supporting fuzzers. Use --variant for
individual fuzzers, e.g. "--variant asan-fuzzer/foo".
--rbe-mode Use a preset RBE configuration.
Valid options: auto, off, cloudtop, legacy_default,
remote_cache_only, low_bandwidth.
'auto' chooses one of the other options for you.
See also build/toolchain/rbe_modes.gni for details.
Default: auto
--cxx-rbe If set, use reclient (RBE) to remotely compile and
cache C++ targets.
This overrides the C++ setting in --rbe-mode.
Default: enabled on linux-x64, disabled elsewhere.
--link-rbe If set, use reclient (RBE) to remotely link and
cache C++ targets.
This overrides the linking setting in --rbe-mode.
Default: disabled
--rust-rbe If set, use the remote backend (RBE) service for
building and caching Rust targets.
This overrides the Rust setting in --rbe-mode.
Default: disabled
--bazel-rbe If set, allow bazel to build remotely on RBE.
This overrides the Bazel setting in --rbe-mode.
Default: disabled
--ide Pass --ide=VALUE to gn when generating to create project
files usable with that IDE. Useful values include "vs"
for Visual Studio or "xcode" for Xcode.
--json-ide-script Pass --json-ide-script=python_script to gn which runs
the given python script after the JSON project file is
generated when using --ide json. The path to the project
file is given as the first argument to the script.
The script may be a path or a gn label.
--netboot Ensure that a network ramboot image is always built.
--release an alias for "--args=is_debug=false"
--variant Selects which runtime variant to use (e.g., asan) by
passing a `select_variant=[VARIANT*,...]` argument
to gn that collects all the --variant arguments in
order. Variants are normal builds in most respects,
but allow users to test different runtime settings
for either the whole build or for a specific target.
This can be specified by passing the variant name
to this argument (e.g. `--variant asan`) for the
former, or the variant name and the target name
separated by a slash (e.g. `--variant asan/my_test`)
for the latter.
--with GNLABEL Labels of additional packages to include in the
'universe' set of available packages. These packages
can be run ephemerally. Multiple labels can be
provided delimited by commas or the --with argument
can be provided multiple times.
--with-base GNLABEL Labels of additional packages to include in the
'base' set of packages. These packages are included in
the system image and can be updated only with an OTA.
Multiple labels can be provided delimited by commas
or the --with-base argument can be provided multiple
times.
--with-cache GNLABEL Labels of additional packages to include in the
'cache' set of packages. These packages are made
available on disk immediately after paving and in
factory flows. These packages are not updated with
an OTA, but are instead updated ephemerally. This
cache of software can be evicted by the system if
storage pressure arises or other policies indicate.
Multiple labels can be provided delimited by commas
or the --with-cache argument can be provided
multiple times.
--with-test GNLABEL Labels of additional tests to include in the build.
When run by 'fx test', these tests are ephemeral. To
add host tests, either use '--with-host' qualify the
the label with the host toolchain, or add a group
which depends on the host tests in the host
toolchain. Multiple labels can be provided delimited
by commas or the '--with-test' argument can be
provided multiple times.
--with-host GNLABEL Labels of additional host-only targets to be
produced by the build. Multiple labels can be
provided delimited by commas or the --with-host
argument can be provided multiple times.
--cargo-toml-gen Enable generation of Cargo.toml files.
--include_clippy Run clippy as part of `fx build` (defaults to `true`)
--fint-params-path Used to specify a path to a fint parameters file, as
selected by `fx repro`. If set, no other flags that
influence the build configuration should be set.
--dev Always recompile fx-set from source.
--assembly-override Pairs of ASSEMBLY_TARGET=OVERRIDE_TARGET labels to use
to define the developer assembly overrides targets to
use with the given assembly target. Can be provided
multiple times with different ASSEMBLY_TARGET labels.
Example:
$ fx set core.x64 --with //bundles/tests
-> build directory: out/default
board: //boards/x64.gni
product: //products/core.gni
universe: //bundles/tests (all test packages)