fuchsia.hardware.bluetooth

APIs for interacting with Bluetooth vendor and transport drivers.

PROTOCOLS

Emulator

Defined in fuchsia.hardware.bluetooth/emulator.fidl

Protocol used to emulate a Bluetooth controller that supports the standard Bluetooth HCI. Represents the bt-emulator device protocol. A bt-emulator device is used for configuring and publishing fake bt-hci devices.

AddBredrPeer

Inserts a new BR/EDR peer device to be emulated by this controller. Once registered, the state of the fake peer can be driven and observed using the peer handle.

A reply will be sent to acknowledge the creation of the fake peer. If a peer cannot be initialized (e.g. due to a missing required field in parameters or for containing an address that is already emulated) the peer handle will be closed and an error reply will be sent.

The peer will appear in inquiry results and respond to requests according to its configuration as long as the peer channel is open. The emulator stops emulating this peer when the channel gets closed, which makes it no longer discoverable and not respond to any requests.

Request

Name	Type
payload	PeerParameters

Response

Name	Type
payload	Emulator_AddBredrPeer_Result

AddLowEnergyPeer

Inserts a new LE peer device to be emulated by this controller. Once registered, the state of the fake peer can be driven and observed using the peer handle.

A reply will be sent to acknowledge the creation of the fake peer. If a peer cannot be initialized (e.g. due to a missing required field in parameters or for containing an address that is already emulated) the peer handle will be closed and an error reply will be sent.

The peer will appear in advertising reports and respond to requests according to its configuration as long as the peer channel is open. The emulator stops emulating this peer when the channel gets closed, which makes it no longer discoverable and not respond to any requests.

Request

Name	Type
payload	PeerParameters

Response

Name	Type
payload	Emulator_AddLowEnergyPeer_Result

Publish

Publish a bt-hci device using the provided settings. Each Emulator instance can only manage a single bt-hci device. Returns Emulator.HCI_ALREADY_PUBLISHED if the device has already been published.

Request

Name	Type
payload	EmulatorSettings

Response

Name	Type
payload	Emulator_Publish_Result

WatchControllerParameters

Hanging get pattern for the controller parameter state will not resolve until the state has changed from the last response.

Request

<EMPTY>

Response

Name	Type
payload	Emulator_WatchControllerParameters_Result

WatchLeScanStates

Returns a vector of the least to most recent states for the link layer LE scan procedure. This method returns when there has been at least one state change since the last invocation of this method by this client.

Multiple calls to this method can be outstanding at a given time. All calls will resolve in a response as soon as there is a change to the scan state.

Request

<EMPTY>

Response

Name	Type
payload	Emulator_WatchLeScanStates_Result

WatchLegacyAdvertisingStates

Returns a vector of the least to most recent states for the link layer LE legacy advertising procedure. This method returns when there has been at least one state change since the last invocation of this method by this client.

Multiple calls to this method can be outstanding at a given time. All calls will resolve in a response as soon as there is a change to the scan state.

Request

<EMPTY>

Response

Name	Type
payload	Emulator_WatchLegacyAdvertisingStates_Result

Hci

Defined in fuchsia.hardware.bluetooth/hci.fidl

ConfigureSco

Configure the HCI for a SCO connection with the indicated parameters. This must be called before sending/receiving data on the SCO channel. Returns ZX_ERR_NOT_SUPPORTED if SCO is not supported by the current vendor or transport driver.

Request

Name	Type
coding_format	ScoCodingFormat
encoding	ScoEncoding
sample_rate	ScoSampleRate

Response

Name	Type
payload	Hci_ConfigureSco_Result

OpenAclDataChannel

Open the two-way HCI ACL data channel. Returns ZX_ERR_ALREADY_BOUND if the channel is already open.

Request

Name	Type
channel	handle<channel>

Response

Name	Type
payload	Hci_OpenAclDataChannel_Result

OpenCommandChannel

Open the two-way HCI command channel for sending HCI commands and receiving event packets. Returns ZX_ERR_ALREADY_BOUND if the channel is already open.

Request

Name	Type
channel	handle<channel>

Response

Name	Type
payload	Hci_OpenCommandChannel_Result

OpenIsoDataChannel

Opens a channel on the provided handle for sending and receiving isochronous data packets. The zircon channel is closed in the event of an error opening the hci channel or if the hci channel is already associated with a handle to another zircon channel. Returns ZX_ERR_NOT_SUPPORTED if ISO is not supported by the current vendor or transport driver. Returns ZX_ERR_ALREADY_BOUND if the channel is already open.

Request

Name	Type
channel	handle<channel>

Response

Name	Type
payload	Hci_OpenIsoDataChannel_Result

OpenScoDataChannel

Opens a SCO channel on the provided handle. The zircon channel is closed in the event of an error opening the hci channel or if the hci channel is already associated with a handle to another zircon channel. Returns ZX_ERR_NOT_SUPPORTED if SCO is not supported by the current vendor or transport driver. Returns ZX_ERR_ALREADY_BOUND if the channel is already open.

Request

Name	Type
channel	handle<channel>

Response

Name	Type
payload	Hci_OpenScoDataChannel_Result

OpenSnoopChannel

Open an output-only channel for monitoring HCI traffic. The format of each message is: [1-octet flags] [n-octet payload] The flags octet is a bitfield with the following values defined:

• 0x00: The payload represents a command packet sent from the host to the controller.
• 0x01: The payload represents an event packet sent by the controller. Returns ZX_ERR_ALREADY_BOUND if the channel is already open.

Request

Name	Type
channel	handle<channel>

Response

Name	Type
payload	Hci_OpenSnoopChannel_Result

ResetSco

Releases resources held by an active SCO connection. Must be called when a SCO connection is closed. Returns ZX_ERR_NOT_SUPPORTED if SCO is not supported by the current vendor or transport driver.

Request

<EMPTY>

Response

Name	Type
payload	Hci_ResetSco_Result

HciTransport

Defined in fuchsia.hardware.bluetooth/hci.fidl

AckReceive

Request

<EMPTY>

ConfigureSco

Establish a SCO connection. Only 1 SCO connection can be configured at a time.

Request

Name	Type
payload	HciTransportConfigureScoRequest

OnReceive

More than one packet event can be sent before acknowledged. Each packet must be acknowledged with AckReceive. Servers should limit the number of pending acknowledgements to avoid channel overflow. A maximum of 10 unacked packets is recommended. If a command or SCO packet is received by the client, the client should close the protocol.

Response

Name	Type
payload	ReceivedPacket

Send

More than one Send can be pending simultaneously. Prefer to limit the number of pending calls to avoid overflow. A maximum of 10 pending calls is suggested. If an event or SCO packet is received by the server, the server should close the protocol.

Request

Name	Type
payload	SentPacket

Response

Name	Type
payload	HciTransport_Send_Result

Peer

Defined in fuchsia.hardware.bluetooth/emulator.fidl

Protocol used to drive the state of a fake peer device.

AssignConnectionStatus

Assign a HCI status for the controller to generate in response to connection requests. Applies to all successive HCI_Create_Connection and HCI_LE_Create_Connection commands. The procedure is acknowledged with an empty response.

Request

Name	Type
status	HciError

Response

Name	Type
payload	Peer_AssignConnectionStatus_Result

EmulateDisconnectionComplete

Emulate disconnection. Does nothing if the peer is not connected.

Request

<EMPTY>

EmulateLeConnectionComplete

Emulates a LE connection event. Does nothing if the peer is already connected. The role parameter determines the link layer connection role.

Request

Name	Type
role	fuchsia.bluetooth/ConnectionRole

SetDeviceClass

Sets the device class reported in the inquiry response for this peer during device discovery. If the peer is not BR/EDR, the server will close with the ZX_ERR_NOT_SUPPORTED epitaph.

Request

Name	Type
value	uint32

Response

Name	Type
payload	Peer_SetDeviceClass_Result

SetLeAdvertisement

Request

Name	Type
payload	PeerSetLeAdvertisementRequest

Response

Name	Type
payload	Peer_SetLeAdvertisement_Result

SetServiceDefinitions

Sets the peer's services that will be discoverable via Service Discovery Protocol. If the peer is not BR/EDR, the server will close with the ZX_ERR_NOT_SUPPORTED epitaph.

Request

Name	Type
service_definitions	vector<fuchsia.bluetooth.bredr/ServiceDefinition>:32

Response

Name	Type
payload	Peer_SetServiceDefinitions_Result

WatchConnectionStates

Returns a vector of the least to most recent controller connection states. This method returns when there has been a state change since the last invocation of this method by this client.

Multiple calls to this method can be outstanding at a given time. All calls will resolve in a response as soon as there is a change to the scan state.

Request

<EMPTY>

Response

Name	Type
payload	Peer_WatchConnectionStates_Result

ScoConnection

Defined in fuchsia.hardware.bluetooth/hci.fidl

AckReceive

Request

<EMPTY>

OnReceive

More than one packet event can be sent before acknowledged. Each packet must be acknowledged with AckReceive. Servers should limit the number of pending acknowledgements to avoid channel overflow. A maximum of 10 unacked packets is recommended.

Response

Name	Type
packet	vector<uint8>:258

Send

More than one Send can be pending simultaneously. Prefer to limit the number of pending calls to avoid overflow. A maximum of 10 pending calls is suggested.

Request

Name	Type
packet	vector<uint8>:258

Response

Name	Type
payload	ScoConnection_Send_Result

Stop

The server will close the protocol when Stop is received. This is useful for synchronization (e.g. before configuring another ScoConnection).

Request

<EMPTY>

Snoop

Defined in fuchsia.hardware.bluetooth/hci.fidl

AcknowledgePackets

Acknowledge packets have been received up to sequence.

Request

Name	Type
sequence	uint64

OnDroppedPackets

Sent by the server once after AcknowledgePackets is received if packets were dropped since the last OnObservePacket.

Response

Name	Type
payload	SnoopOnDroppedPacketsRequest

OnObservePacket

A packet has been transmitted/received. Some number of packets can be observed before the server stalls. The server is allowed to drop packets if the client takes too long to acknowledge packets.

Response

Name	Type
payload	SnoopOnObservePacketRequest

Vendor

Defined in fuchsia.hardware.bluetooth/vendor.fidl

The BtVendor protocol may be implemented by vendor drivers to support feature interrogation and vendor command encoding.

EncodeCommand

Encode the vendor HCI command and return the encoded command. See VendorCommand for possible commands and parameters.

• error ZX_ERR_NOT_SUPPORTED The command is not supported.
• error ZX_ERR_INVALID_ARGS The parameters of the command are invalid.

Request

Name	Type
payload	VendorCommand

Response

Name	Type
payload	Vendor_EncodeCommand_Result

GetFeatures

Returns the Vendor Features supported by this controller.

Request

<EMPTY>

Response

Name	Type
payload	Vendor_GetFeatures_Result

OpenHci

Deprecated. Open the HCI protocol to the controller. This call may block until the controller has been initialized. Returns ALREADY_BOUND if another client has already connected.

Request

<EMPTY>

Response

Name	Type
payload	Vendor_OpenHci_Result

OpenHciTransport

Open the HciTransport protocol to the controller. This call may block until the controller has been initialized. Returns ALREADY_BOUND if another client has already connected.

Request

<EMPTY>

Response

Name	Type
payload	Vendor_OpenHciTransport_Result

OpenSnoop

Open the Snoop protocol to the transport driver. Returns ALREADY_BOUND if another client has already connected.

Request

<EMPTY>

Response

Name	Type
payload	Vendor_OpenSnoop_Result

VirtualController

Defined in fuchsia.hardware.bluetooth/virtual.fidl

Used for spawning virtual Bluetooth devices.

CreateEmulator

Creates a child device, and returns the name of the child created.

Request

<EMPTY>

Response

Name	Type
payload	VirtualController_CreateEmulator_Result

CreateLoopbackDevice

Creates a virtual Bluetooth serial device, speaking the BT HCI UART protocol on the provided handle. The zircon channel is closed in the event of an error.

Request

Name	Type
payload	VirtualControllerCreateLoopbackDeviceRequest

STRUCTS

Emulator_AddBredrPeer_Response

Defined in fuchsia.hardware.bluetooth/emulator.fidl

<EMPTY>

Emulator_AddLowEnergyPeer_Response

Defined in fuchsia.hardware.bluetooth/emulator.fidl

<EMPTY>

Emulator_Publish_Response

Defined in fuchsia.hardware.bluetooth/emulator.fidl

<EMPTY>

Emulator_WatchLeScanStates_Response

Defined in fuchsia.hardware.bluetooth/emulator.fidl

Field	Type	Description	Default
states	vector<LeScanState>		No default

Emulator_WatchLegacyAdvertisingStates_Response

Defined in fuchsia.hardware.bluetooth/emulator.fidl

Field	Type	Description	Default
states	vector<LegacyAdvertisingState>		No default

HciTransport_Send_Response

Defined in fuchsia.hardware.bluetooth/hci.fidl

<EMPTY>

Hci_ConfigureSco_Response

Defined in fuchsia.hardware.bluetooth/hci.fidl

<EMPTY>

Hci_OpenAclDataChannel_Response

Defined in fuchsia.hardware.bluetooth/hci.fidl

<EMPTY>

Hci_OpenCommandChannel_Response

Defined in fuchsia.hardware.bluetooth/hci.fidl

<EMPTY>

Hci_OpenIsoDataChannel_Response

Defined in fuchsia.hardware.bluetooth/hci.fidl

<EMPTY>

Hci_OpenScoDataChannel_Response

Defined in fuchsia.hardware.bluetooth/hci.fidl

<EMPTY>

Hci_OpenSnoopChannel_Response

Defined in fuchsia.hardware.bluetooth/hci.fidl

<EMPTY>

Hci_ResetSco_Response

Defined in fuchsia.hardware.bluetooth/hci.fidl

<EMPTY>

Peer_AssignConnectionStatus_Response

Defined in fuchsia.hardware.bluetooth/emulator.fidl

<EMPTY>

Peer_SetDeviceClass_Response

Defined in fuchsia.hardware.bluetooth/emulator.fidl

<EMPTY>

Peer_SetLeAdvertisement_Response

Defined in fuchsia.hardware.bluetooth/emulator.fidl

<EMPTY>

Peer_SetServiceDefinitions_Response

Defined in fuchsia.hardware.bluetooth/emulator.fidl

<EMPTY>

Peer_WatchConnectionStates_Response

Defined in fuchsia.hardware.bluetooth/emulator.fidl

Field	Type	Description	Default
states	vector<ConnectionState>		No default

ScoConnection_Send_Response

Defined in fuchsia.hardware.bluetooth/hci.fidl

<EMPTY>

ScoPacket

Defined in fuchsia.hardware.bluetooth/hci.fidl

Field	Type	Description	Default
packet	vector<uint8>:258		No default

Vendor_EncodeCommand_Response

Defined in fuchsia.hardware.bluetooth/vendor.fidl

Field	Type	Description	Default
encoded	vector<uint8>:16		No default

Vendor_OpenHciTransport_Response resource

Defined in fuchsia.hardware.bluetooth/vendor.fidl

Field	Type	Description	Default
channel	client_end:HciTransport		No default

Vendor_OpenHci_Response resource

Defined in fuchsia.hardware.bluetooth/vendor.fidl

Field	Type	Description	Default
channel	client_end:Hci		No default

Vendor_OpenSnoop_Response resource

Defined in fuchsia.hardware.bluetooth/vendor.fidl

Field	Type	Description	Default
channel	client_end:Snoop		No default

VirtualController_CreateEmulator_Response

Defined in fuchsia.hardware.bluetooth/virtual.fidl

Field	Type	Description	Default
name	string:32?		No default

ENUMS

ConnectionState flexible

Type: uint32

Defined in fuchsia.hardware.bluetooth/emulator.fidl

Name	Value	Description
CONNECTED	1
DISCONNECTED	2

EmulatorError flexible

Type: uint32

Defined in fuchsia.hardware.bluetooth/emulator.fidl

Error codes that can be generated for emulator-wide configurations.

Name	Value	Description
FAILED	1
HCI_ALREADY_PUBLISHED	2

EmulatorPeerError flexible

Type: uint32

Defined in fuchsia.hardware.bluetooth/emulator.fidl

Error codes that are generated for functions that manipulate fake peers.

Name	Value	Description
ADDRESS_REPEATED	1
PARAMETERS_INVALID	2
NOT_FOUND	3

HciConfig flexible

Type: uint32

Defined in fuchsia.hardware.bluetooth/emulator.fidl

Pre-set HCI configurations.

Name	Value	Description
DUAL_MODE	1	Support both BR/EDR and LE in LMP features.
LE_ONLY	2	Limits supported features and HCI commands to those that are required for LE only.

HciError flexible

Type: uint8

Defined in fuchsia.hardware.bluetooth/emulator.fidl

Defines the list of HCI protocol error codes that a Bluetooth controller can report. These values are taken from Bluetooth Core Specification v5.4, Vol 2, Part D, Section 1.3

Name	Value	Description
SUCCESS	0
UNKNOWN_COMMAND	1
UNKNOWN_CONNECTION_ID	2
HARDWARE_FAILURE	3
PAGE_TIMEOUT	4
AUTHENTICATION_FAILURE	5
PIN_OR_KEY_MISSING	6
MEMORY_CAPACITY_EXCEEDED	7
CONNECTION_TIMEOUT	8
CONNECTION_LIMIT_EXCEEDED	9
SYNCHRONOUS_CONNECTION_LIMIT_EXCEEDED	10
CONNECTION_ALREADY_EXISTS	11
COMMAND_DISALLOWED	12
CONNECTION_REJECTED_LIMITED_RESOURCES	13
CONNECTION_REJECTED_SECURITY	14
CONNECTION_REJECTED_BAD_BD_ADDR	15
CONNECTION_ACCEPT_TIMEOUT_EXCEEDED	16
UNSUPPORTED_FEATURE_OR_PARAMETER	17
INVALID_HCICOMMAND_PARAMETERS	18
REMOTE_USER_TERMINATED_CONNECTION	19
REMOTE_DEVICE_TERMINATED_CONNECTION_LOW_RESOURCES	20
REMOTE_DEVICE_TERMINATED_CONNECTION_POWER_OFF	21
CONNECTION_TERMINATED_BY_LOCAL_HOST	22
REPEATED_ATTEMPTS	23
PAIRING_NOT_ALLOWED	24
UNKNOWN_LMP_PDU	25
UNSUPPORTED_REMOTE_FEATURE	26
SCO_OFFSET_REJECTED	27
SCO_INTERVAL_REJECTED	28
SCO_AIR_MODE_REJECTED	29
INVALID_LMP_OR_LL_PARAMETERS	30
UNSPECIFIED_ERROR	31
UNSUPPORTED_LMP_OR_LL_PARAMETER_VALUE	32
ROLE_CHANGE_NOT_ALLOWED	33
LMP_OR_LL_RESPONSE_TIMEOUT	34
LMP_ERROR_TRANSACTION_COLLISION	35
LMP_PDU_NOT_ALLOWED	36
ENCRYPTION_MODE_NOT_ACCEPTABLE	37
LINK_KEY_CANNOT_BE_CHANGED	38
REQUESTED_QOS_NOT_SUPPORTED	39
INSTANT_PASSED	40
PAIRING_WITH_UNIT_KEY_NOT_SUPPORTED	41
DIFFERENT_TRANSACTION_COLLISION	42
RESERVED0	43
QOS_UNACCEPTABLE_PARAMETER	44
QOS_REJECTED	45
CHANNEL_CLASSIFICATION_NOT_SUPPORTED	46
INSUFFICIENT_SECURITY	47
PARAMETER_OUT_OF_MANDATORY_RANGE	48
RESERVED1	49
ROLE_SWITCH_PENDING	50
RESERVED2	51
RESERVED_SLOT_VIOLATION	52
ROLE_SWITCH_FAILED	53
EXTENDED_INQUIRY_RESPONSE_TOO_LARGE	54
SECURE_SIMPLE_PAIRING_NOT_SUPPORTED_BY_HOST	55
HOST_BUSY_PAIRING	56
CONNECTION_REJECTED_NO_SUITABLE_CHANNEL_FOUND	57
CONTROLLER_BUSY	58
UNACCEPTABLE_CONNECTION_PARAMETERS	59
DIRECTED_ADVERTISING_TIMEOUT	60
CONNECTION_TERMINATED_MIC_FAILURE	61
CONNECTION_FAILED_TO_BE_ESTABLISHED	62
MAC_CONNECTION_FAILED	63
COARSE_CLOCK_ADJUSTMENT_REJECTED	64
TYPE0_SUBMAP_NOT_DEFINED	65
UNKNOWN_ADVERTISING_IDENTIFIER	66
LIMIT_REACHED	67
OPERATION_CANCELLED_BY_HOST	68
PACKET_TOO_LONG	69
TOO_LATE	70
TOO_EARLY	71

LegacyAdvertisingType strict

Type: uint8

Defined in fuchsia.hardware.bluetooth/emulator.fidl

LE legacy advertising types from Bluetooth Core Specification v5.4, Vol 4, Part E, 7.8.5.

Name	Value	Description
ADV_IND	0	Connectable and scannable.
ADV_DIRECT_IND	1	Connectable, high-duty cycle, directed.
ADV_SCAN_IND	2	Scannable, undirected.
ADV_NONCONN_IND	3	Non-connectable, undirected
SCAN_RSP	4	Scan response

PacketDirection strict

Type: uint32

Defined in fuchsia.hardware.bluetooth/hci.fidl

Name	Value	Description
HOST_TO_CONTROLLER	1
CONTROLLER_TO_HOST	2

ScoCodingFormat flexible

Type: uint8

Defined in fuchsia.hardware.bluetooth/hci.fidl

Name	Value	Description
CVSD	1
MSBC	2

ScoEncoding flexible

Type: uint8

Defined in fuchsia.hardware.bluetooth/hci.fidl

Name	Value	Description
BITS_8	1
BITS_16	2

ScoSampleRate flexible

Type: uint8

Defined in fuchsia.hardware.bluetooth/hci.fidl

Name	Value	Description
KHZ_8	1
KHZ_16	2

VendorAclDirection flexible

Type: uint8

Defined in fuchsia.hardware.bluetooth/vendor.fidl

Name	Value	Description
SOURCE	1
SINK	2

VendorAclPriority flexible

Type: uint8

Defined in fuchsia.hardware.bluetooth/vendor.fidl

Name	Value	Description
NORMAL	1
HIGH	2

TABLES

AclBufferSettings

Defined in fuchsia.hardware.bluetooth/emulator.fidl

The HCI ACL data flow-control parameters.

Ordinal	Field	Type	Description
1	data_packet_length	uint16	ACL frame MTU in bytes.
2	total_num_data_packets	uint8	The maximum number of ACL frames that the controller can buffer.

AdvertisingData

Defined in fuchsia.hardware.bluetooth/emulator.fidl

Ordinal	Field	Type	Description
1	data	vector<uint8>:31

AndroidVendorSupport

Defined in fuchsia.hardware.bluetooth/vendor.fidl

Indicates support for Android Vendor Extensions If empty, Android HCI Extensions are supported but the version is unspecified. The version should be detected using the LE Get Vendor Capabilities Command.

Ordinal	Field	Type	Description
1	major_version	uint8
2	minor_version	uint8

AudioOffloadSettings

Defined in fuchsia.hardware.bluetooth/vendor.fidl

Various settings for audio offload data paths, which vary by controller manufacturer and firmware version.

Ordinal	Field	Type	Description
1	sco_offload_index	uint8	The index to use when SCO OFFLOAD DataPath is requested.

ControllerParameters

Defined in fuchsia.hardware.bluetooth/emulator.fidl

Contains Bluetooth controller & baseband parameters that are writable by the host but don't fall under a particular procedural category (as are those defined below).

Ordinal	Field	Type	Description
1	local_name	string:248	The local name used for the Link Layer name discovery procedure. This parameter only applies for the BR/EDR transport. In LE, the local name is provided as an advertising parameter and via GATT.
2	device_class	fuchsia.bluetooth/DeviceClass	The local "Class of Device" used during the BR/EDR inquiry procedure.

EmulatorSettings

Defined in fuchsia.hardware.bluetooth/emulator.fidl

Controller settings used by the emulator.

Ordinal	Field	Type	Description
1	address	fuchsia.bluetooth/Address	The BD_ADDR (BR/EDR) or LE Public Device Address. Defaults to "00:00:00:00:00:00".
2	hci_config	HciConfig	Supported HCI command configuration. Defaults to "DUAL_MODE".
3	extended_advertising	bool	True if the 5.0 extended advertising features are supported. Defaults to "false".
4	acl_buffer_settings	AclBufferSettings	The ACL-U data buffer settings. Defaults to data_packet_length: 1024 total_num_data_packets: 5 IF hci_config is set to DUAL_MODE. Defaults to null otherwise.
5	le_acl_buffer_settings	AclBufferSettings	The LE-U ACL data buffer settings. Defaults to data_packet_length: 251 total_num_data_packets: 5

HciTransportConfigureScoRequest resource

Defined in fuchsia.hardware.bluetooth/hci.fidl

Ordinal	Field	Type	Description
1	coding_format	ScoCodingFormat	Required.
2	encoding	ScoEncoding	Required.
3	sample_rate	ScoSampleRate	Required.
4	connection	server_end:ScoConnection	Required.

LeScanState

Defined in fuchsia.hardware.bluetooth/emulator.fidl

Represents the LE scan state. The fields are present if scan parameters have been configured.

Ordinal	Field	Type	Description
1	enabled	bool	True if a scan is enabled.
2	active	bool	True if an active scan is enabled. Otherwise the scan is passive.
3	interval	uint16	The scan interval and window parameters. These are defined in Bluetooth controller "timeslices" where 1 slice = 0.625 ms. Valid values range from 0x4 (2.5 ms) to 0x4000 (10.24 ms).
4	window	uint16
5	filter_duplicates	bool	True if duplicate filtering has been enabled.
6	address_type	fuchsia.bluetooth/AddressType	The type of local device address used.

LegacyAdvertisingState

Defined in fuchsia.hardware.bluetooth/emulator.fidl

Controller parameters for legacy advertising.

Ordinal	Field	Type	Description
1	enabled	bool	True if advertising has been enabled using the HCI_LE_Set_Advertising_Enable command. This field is always present.
2	type	LegacyAdvertisingType	The most recently configured advertising type. This field is always present. Defaults to fuchsia.hardware.bluetooth/LegacyAdvertisingType.ADV_IND.
3	address_type	fuchsia.bluetooth/AddressType	The LE address type being used for advertising. This field is always present. Defaults to fuchsia.bluetooth/AddressType.PUBLIC.
4	interval_min	uint16	The host-specified advertising interval range parameters. Present only if configured.
5	interval_max	uint16
6	advertising_data	AdvertisingData	Any configured advertising and scan response data. Present only if either field is non-zero.
7	scan_response	AdvertisingData

PeerParameters resource

Defined in fuchsia.hardware.bluetooth/emulator.fidl

Parameters used to emulate a peer's behavior over the BR/EDR/Low Energy transport.

Ordinal	Field	Type	Description
1	address	fuchsia.bluetooth/Address	The public BR/EDR BD_ADDR address of a peer. This field is mandatory.
2	connectable	bool	When present and true, the peer will send connectable advertisements and accept connection requests. The peer will ignore connection requests if not connectable.
3	channel	server_end:Peer	Server end of channel bound to Peer protocol.

PeerSetLeAdvertisementRequest

Defined in fuchsia.hardware.bluetooth/emulator.fidl

Ordinal	Field	Type	Description
1	le_address	fuchsia.bluetooth/Address	The LE address of the peer.
2	advertisement	AdvertisingData	The advertising data contents. If not present, the advertising data sent by this peer will be empty.
3	scan_response	AdvertisingData	The scan response data contents. When present, the fake controller will generate scannable advertising packets and scan response events.

SnoopOnDroppedPacketsRequest

Defined in fuchsia.hardware.bluetooth/hci.fidl

Ordinal	Field	Type	Description
1	sent	uint32
2	received	uint32

SnoopOnObservePacketRequest

Defined in fuchsia.hardware.bluetooth/hci.fidl

Ordinal	Field	Type	Description
1	sequence	uint64	Monotonically increasing packet count. Used for flow control in conjunction with OnAcknowledgePackets.
2	direction	PacketDirection
3	packet	SnoopPacket

VendorFeatures

Defined in fuchsia.hardware.bluetooth/vendor.fidl

Table of features supported by the vendor.

Ordinal	Field	Type	Description
1	acl_priority_command	bool	Supports the SetAclPriority command If missing, the command is not supported.
2	android_vendor_extensions	AndroidVendorSupport	Supports Android Vendor Extensions If missing, Android Vendor Extensions are not supported.
3	audio_offload_settings	AudioOffloadSettings	Specify some alternative settings for audio offload paths. If missing, use the reasonable defaults or configured settings. Added: 28

VendorSetAclPriorityParams

Defined in fuchsia.hardware.bluetooth/vendor.fidl

Ordinal	Field	Type	Description
1	connection_handle	uint16	The ACL connection handle which is requested to be prioritized.
2	priority	VendorAclPriority
3	direction	VendorAclDirection	The direction data should be prioritized in. May not be supported by all vendors. Ignored when priority is normal.

VirtualControllerCreateLoopbackDeviceRequest resource

Defined in fuchsia.hardware.bluetooth/virtual.fidl

Ordinal	Field	Type	Description
1	uart_channel	handle<channel>

UNIONS

Emulator_AddBredrPeer_Result strict

Defined in fuchsia.hardware.bluetooth/emulator.fidl

Ordinal	Variant	Type	Description
1	response	Emulator_AddBredrPeer_Response
2	err	EmulatorPeerError
3	framework_err	internal

Emulator_AddLowEnergyPeer_Result strict

Defined in fuchsia.hardware.bluetooth/emulator.fidl

Ordinal	Variant	Type	Description
1	response	Emulator_AddLowEnergyPeer_Response
2	err	EmulatorPeerError
3	framework_err	internal

Emulator_Publish_Result strict

Defined in fuchsia.hardware.bluetooth/emulator.fidl

Ordinal	Variant	Type	Description
1	response	Emulator_Publish_Response
2	err	EmulatorError
3	framework_err	internal

Emulator_WatchControllerParameters_Result strict

Defined in fuchsia.hardware.bluetooth/emulator.fidl

Ordinal	Variant	Type	Description
1	response	ControllerParameters
3	framework_err	internal

Emulator_WatchLeScanStates_Result strict

Defined in fuchsia.hardware.bluetooth/emulator.fidl

Ordinal	Variant	Type	Description
1	response	Emulator_WatchLeScanStates_Response
3	framework_err	internal

Emulator_WatchLegacyAdvertisingStates_Result strict

Defined in fuchsia.hardware.bluetooth/emulator.fidl

Ordinal	Variant	Type	Description
1	response	Emulator_WatchLegacyAdvertisingStates_Response
3	framework_err	internal

HciTransport_Send_Result strict

Defined in fuchsia.hardware.bluetooth/hci.fidl

Ordinal	Variant	Type	Description
1	response	HciTransport_Send_Response
3	framework_err	internal

Hci_ConfigureSco_Result strict

Defined in fuchsia.hardware.bluetooth/hci.fidl

Ordinal	Variant	Type	Description
1	response	Hci_ConfigureSco_Response
2	err	zx/Status
3	framework_err	internal

Hci_OpenAclDataChannel_Result strict

Defined in fuchsia.hardware.bluetooth/hci.fidl

Ordinal	Variant	Type	Description
1	response	Hci_OpenAclDataChannel_Response
2	err	zx/Status
3	framework_err	internal

Hci_OpenCommandChannel_Result strict

Defined in fuchsia.hardware.bluetooth/hci.fidl

Ordinal	Variant	Type	Description
1	response	Hci_OpenCommandChannel_Response
2	err	zx/Status
3	framework_err	internal

Hci_OpenIsoDataChannel_Result strict

Defined in fuchsia.hardware.bluetooth/hci.fidl

Ordinal	Variant	Type	Description
1	response	Hci_OpenIsoDataChannel_Response
2	err	zx/Status
3	framework_err	internal

Hci_OpenScoDataChannel_Result strict

Defined in fuchsia.hardware.bluetooth/hci.fidl

Ordinal	Variant	Type	Description
1	response	Hci_OpenScoDataChannel_Response
2	err	zx/Status
3	framework_err	internal

Hci_OpenSnoopChannel_Result strict

Defined in fuchsia.hardware.bluetooth/hci.fidl

Ordinal	Variant	Type	Description
1	response	Hci_OpenSnoopChannel_Response
2	err	zx/Status
3	framework_err	internal

Hci_ResetSco_Result strict

Defined in fuchsia.hardware.bluetooth/hci.fidl

Ordinal	Variant	Type	Description
1	response	Hci_ResetSco_Response
2	err	zx/Status
3	framework_err	internal

Peer_AssignConnectionStatus_Result strict

Defined in fuchsia.hardware.bluetooth/emulator.fidl

Ordinal	Variant	Type	Description
1	response	Peer_AssignConnectionStatus_Response
3	framework_err	internal

Peer_SetDeviceClass_Result strict

Defined in fuchsia.hardware.bluetooth/emulator.fidl

Ordinal	Variant	Type	Description
1	response	Peer_SetDeviceClass_Response
3	framework_err	internal

Peer_SetLeAdvertisement_Result strict

Defined in fuchsia.hardware.bluetooth/emulator.fidl

Ordinal	Variant	Type	Description
1	response	Peer_SetLeAdvertisement_Response
2	err	EmulatorPeerError
3	framework_err	internal

Peer_SetServiceDefinitions_Result strict

Defined in fuchsia.hardware.bluetooth/emulator.fidl

Ordinal	Variant	Type	Description
1	response	Peer_SetServiceDefinitions_Response
3	framework_err	internal

Peer_WatchConnectionStates_Result strict

Defined in fuchsia.hardware.bluetooth/emulator.fidl

Ordinal	Variant	Type	Description
1	response	Peer_WatchConnectionStates_Response
3	framework_err	internal

ReceivedPacket flexible

Defined in fuchsia.hardware.bluetooth/hci.fidl

Packet received by the host from the controller.

Ordinal	Variant	Type	Description
1	event	vector<uint8>:257
2	acl	vector<uint8>:65539
3	iso	vector<uint8>:16387

ScoConnection_Send_Result strict

Defined in fuchsia.hardware.bluetooth/hci.fidl

Ordinal	Variant	Type	Description
1	response	ScoConnection_Send_Response
3	framework_err	internal

SentPacket flexible

Defined in fuchsia.hardware.bluetooth/hci.fidl

Packet sent by the host to the controller.

Ordinal	Variant	Type	Description
1	command	vector<uint8>:258
2	acl	vector<uint8>:65539
3	iso	vector<uint8>:16387

SnoopPacket flexible

Defined in fuchsia.hardware.bluetooth/hci.fidl

Ordinal	Variant	Type	Description
1	event	vector<uint8>:257
2	command	vector<uint8>:258
3	acl	vector<uint8>:65539
4	sco	vector<uint8>:258
5	iso	vector<uint8>:16387

VendorCommand flexible

Defined in fuchsia.hardware.bluetooth/vendor.fidl

Ordinal	Variant	Type	Description
1	set_acl_priority	VendorSetAclPriorityParams

Vendor_EncodeCommand_Result strict

Defined in fuchsia.hardware.bluetooth/vendor.fidl

Ordinal	Variant	Type	Description
1	response	Vendor_EncodeCommand_Response
2	err	zx/Status
3	framework_err	internal

Vendor_GetFeatures_Result strict

Defined in fuchsia.hardware.bluetooth/vendor.fidl

Ordinal	Variant	Type	Description
1	response	VendorFeatures
3	framework_err	internal

Vendor_OpenHciTransport_Result strict resource

Defined in fuchsia.hardware.bluetooth/vendor.fidl

Ordinal	Variant	Type	Description
1	response	Vendor_OpenHciTransport_Response
2	err	zx/Status
3	framework_err	internal

Vendor_OpenHci_Result strict resource

Defined in fuchsia.hardware.bluetooth/vendor.fidl

Ordinal	Variant	Type	Description
1	response	Vendor_OpenHci_Response
2	err	zx/Status
3	framework_err	internal

Vendor_OpenSnoop_Result strict resource

Defined in fuchsia.hardware.bluetooth/vendor.fidl

Ordinal	Variant	Type	Description
1	response	Vendor_OpenSnoop_Response
2	err	zx/Status
3	framework_err	internal

VirtualController_CreateEmulator_Result strict

Defined in fuchsia.hardware.bluetooth/virtual.fidl

Ordinal	Variant	Type	Description
1	response	VirtualController_CreateEmulator_Response
2	err	zx/Status
3	framework_err	internal

CONSTANTS

Name	Value	Type	Description
ACL_PACKET_MAX	65539	uint64
BT_VENDOR_MAX_COMMAND_BUFFER_LEN	16	uint16	The maximum buffer length an encoded command might require. Update when adding new commands that might require a larger buffer.
COMMAND_MAX	258	uint64
EVENT_MAX	257	uint64
ISO_PACKET_MAX	16387	uint64
MAX_LEGACY_ADVERTISING_DATA_LENGTH	31	uint8	Advertising data MTUs for legacy (4.x) and extended (5.x) advertising PDU types (see Core Specification v5.4, Vol 4, Part E, Sections 7.3.11 & 7.8.54).
MAX_LOCAL_NAME_LENGTH	248	uint8	The maximum size (in bytes) of a local name assigned using the HCI_Write_Local_Name command (see Core Specification v5.4, Vol 4, Part E, 7.3.11).
MAX_NAME_LENGTH	32	uint32
MAX_PEER_SERVICES	32	uint8	Maximum service records that can be advertised at once.
SCO_PACKET_MAX	258	uint64

SERVICES

EmulatorService

Defined in fuchsia.hardware.bluetooth/emulator.fidl

Name	Type	Transport
device	fuchsia.hardware.bluetooth/Emulator	Channel

HciService

Defined in fuchsia.hardware.bluetooth/hci.fidl

Name	Type	Transport
hci	fuchsia.hardware.bluetooth/Hci	Channel
hci_transport	fuchsia.hardware.bluetooth/HciTransport	Channel
snoop	fuchsia.hardware.bluetooth/Snoop	Channel

Service

Defined in fuchsia.hardware.bluetooth/vendor.fidl

Name	Type	Transport
vendor	fuchsia.hardware.bluetooth/Vendor	Channel